Features Compatible with TTL gatesPush-On Connector TerminalsMounts on a TO3 Transistor Heat Sink |
RS2 Series |
 |
|
Printed Circuit Board Mountable Solid State Relay, 7 Amp |
|
Input Specifications
Control Voltage:
RS2-1D7-33: 5VDC
RS2-1D7-35: 12VDC
Max. Pick-Up Voltage:
RS2-1D7-33: 4.3VDC
RS2-1D7-35: 10.3VDC
Min. Drop-Out Voltage: 1.5VDC
Max. Input Current: 15mADC
Output Specifications
Nom. Off-State Voltage Voltage: 120V (RMS)
Non-Repetitive Peak Voltage: 400V
Min.-Max. Off-State Voltage: 20V to 260V (RMS)
Rated Load Current: 7A (RMS)
Min. Load Current: 20mA (RMS)
Non-Repetitive Surge Current: 50A
Max. Off-State Leakage Current: 100µA (RMS)
Max. On-State Voltage: 18V (RMS)
Electrical Specifications
Operational Characteristics
Response Time:
Turn-On: 16mS Max
Turn-Off: 60mS Max
Max. Rate of Rise of Off-State Voltage:
Blocking: 100V/µs
Commutating: 4V/µs
Dielectric Strength (Input-Output Isolation): 2500VAC
Insulation Resistance (@ 500VDC): 10,000M Ohm
Max. I2t for Fusing (8.3ms): 24
Enviornmental Characteristics
Operating: -40° to +65°C
Storage: -40° to +100°C
|
Dimensional Drawings D37
Schematic Showing Typical TTL Input Connections

|
|