SINGLE SHOT - Upon closure of the control switch, output switch operates and time period begins. The time period is not affected by duration of the control switch closure. At the end of the time period, the output switch returns to normal. Continuous power must be furnished to this timer.

DPDT, 2 Form "C"

ACCESSORIES
Mounting Styles	Description	NTE Type No.
Surface Mount	11-Pin Octal	R95-104
Panel Mount	11-Pin Octal	R95-119
DIN Rail Mount	11-Pin Octal	R95-114
	11-Pin Octal	R95-182

Dimensional Drawing	Timing Range Chart
D36

Electrical Specifications

Contact
Rating: 10 Amps 240VAC or less, 1/3 HP, 240VAC or 120VAC,
Pilot Duty 345VA, 120VAC or 240VAC, 50/60Hz
Life: 500,000 operations at full load
Mechanical Life: 7,000,000 operations at no load

Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart

Timing
Timing Adjustment Modes Available: See Timing Range Chart

Repeat Accuracy
±0.5% - after established at steady temperature (4 hours)
Timing Tolerance at High End of Range: -0, +10%
Timing Tolerance at Low End of Range: +0, -50%
Reset Time: 60mS Typ

Protection
Transient: Surge Test 10,000V for 20mS
Dielectric Breakdown:
             Coil To Contact: 1850 VAC
             Across Open Contact: 1850 VAC

Environmental Characteristics
Operating: -20°C to +55°C

Weight
Std: 4.5 ozs. (130 grams) - approx