DELAY ON RELEASE - Input voltage must be applied continuously to operate the internal relay. When the control switch is closed, the relay energizes. When the control switch is opened, timing begins. When timing is complete, the relay will de-energize. Time may be reset to zero during timing by closing the control switch.

DPDT, 2 Form "C"

ACCESSORIES
Mounting Styles	Description	NTE Type No.
Surface Mount	11-Pin Blade	R95-105
Panel Mount, Solder Terminal	11-Pin Blade	R95-116
Panel Mount, Quick Connect	11-Pin Blade	R95-124
DIN Rail Mount	11-Pin Blade	R95-115
PC Mount	11-Pin Blade	R95-123

Dimensional Drawing
D18a

Electrical Specifications
Contact
Rating: 12 Amps 120 VAC, 28 VDC Resistive,
1/2 HP @ 240 VAC, 1/3 HP @ 120 VAC
Life: 300,000 operations @ 120 VAC, 12A resistive
5,000,000 operations @ 32 VDC, 5A resistive

Input
Nominal Input Voltages: 120 VAC
Steady State Input Current: 20mA @ 120 VAC

Timing
Timing Adjustment Modes Available:
             0.1 to 10 sec (K-suffix)
             1.0 to 180 sec (L-suffix)

Repeat Accuracy
±0.1% ±33mS AC constant voltage & temperature
Percent Timing Range over Temperature & Voltage Range: ±10%
Timing Tolerance at High End of Range: -0, +40%
Timing Tolerance at Low End of Range: +0, -40%
Reset Time: 100mS Max

Protection
Transient: Twice normal for 1mS
Dielectric Breakdown:
             Coil To Contact: 2000 VAC
             Across Open Contact: 1000 VAC

Environmental Characteristics
Operating: -10°C to +55°C
Storage: -55°C to +85°C

Weight
Std: 4 ozs. (96 grams) - approx