INTERVAL ON - The relay will operate immediately when the input voltage is applied. At the end of an adjustable interval the relay will release and remain in this state until re-application of the input voltage.

DPDT, 2 Form "C"

ACCESSORIES
Mounting Styles	Description	NTE Type No.
Surface Mount	8-Pin Octal	R95-101
Panel Mount	8-Pin Octal	R95-118
DIN Rail Mount	8-Pin Octal	R95-113
	8-Pin Octal	R95-181

Dimensional Drawing
D16

Electrical Specifications
Contact
Rating: 10 Amps 120 VAC, 30 VDC-8 Amp, 1/2 HP @ 240 VAC,
1/3 HP @ 120 VAC
Life: 500,000 operations @ 120 VAC, 10A resistive
1,000,000 operations @ 120 VAC, 5A resistive
2,000,000 operations @ 120 VAC, 2A resistive
Mechanical Life: 50,000,000 operations

Input
Nominal Input Voltages: See Chart
Steady State Input Current: See Chart

Timing
Timing Adjustment Modes Available:
             0.1 to 10 sec (K-suffix)
             1.0 to 180 sec (L-suffix)
             2.0 to 300 sec (M-suffix)

Repeat Accuracy
±0.1% - constant voltage & temperature
Percent Timing Range over Temperature & Voltage Range: ±10%
Timing Tolerance at High End of Range: -0, +40%
Timing Tolerance at Low End of Range: +0, -40%
Reset Time: 100mS Max

Protection
Transient: UL508 surge test 5000V for 50mS
Dielectric Breakdown:
             Coil To Contact: 1500 VAC
             Across Open Contact: 1000 VAC
             Noise Immunity: NEMA ICS 2-230 2500 VAC

Environmental Characteristics
Operating: -10°C to +55°C
Storage: -55°C to +85°C

Weight
Std: 4 ozs. (115 grams) - approx