Encapsulating and Potting Epoxy Compound 832B / 832C

Protects sensitive electronic components from impact, shock, vibration, heat, conductivity, moisture, chemicals, and visual inspection.
Features:
Non-porous, water and chemical resistant
Extremely impact resistant (contains a form of nylon)
Colored black, to prevent visual inspection
Affords total security, once cast it can not be removed
Excellent machining properties
Non-conductive, an electrical insulator - Low toxicity
Suitable for explosion proof components (spark arresting)
Easy and simple to mix - Long pot life
Can be cured in one hour at 65°C (150°F)

Available Sizes
Epoxy - Black Encapsulating & Potting Compound
832B-375ML - 375ml (12 oz) Liquid
832B-3L - 3L (0.8 gal) Liquid
832B-60L - 60L (16 gal) Liquid
Epoxy - Clear Encapsulating & Potting Compound
832C-375ML - 375ml (12 oz) Liquid
832C-3L - 3L (0.8 gal) Liquid
832C-60L - 60L (16 gal) Liquid

Flame Retardant Potting & Encapsulating Epoxy Compound 832-FRB

Meets UL 94V-0 Vertical Burn Test

A two component self extinguishing epoxy compound. Provides insulation and protects sensitive components and circuits from: static discharge, impact, heat, shock, conductivity, abuse, vibration, moisture, fresh and salt water, chemicals and analysis. Blue in color.

This item is currently unavailable.

A new improved EPOXY is do out in October.

Watch for it.

Thermally Conductive Epoxy Encapsulating & Potting Compound 832-TC

100% solids. Formulated with undiluted Bis F resin for superior physical properties, and pigmented with high purity aluminum oxide pigment to provide excellent thermal conductivity at reasonable cost. Pigmented black for excellent thermal absorption and emission.
Provides superior protection from impact, shock, con-ductivity, moisture, abuse, chemicals, and analysis
Two part epoxy, with a 1 to 1 mixing ratio by volume.
Two hour working time
Suitable for large production runs
Cures in 2 days at room temperature or one hour at 65°C.
Available Sizes
Epoxy - Black, Thermally Conductive Encapsulating & Potting Compound
832TC-450ML - 450mL kit (16 oz) Liquid
832TC-2L - 2 liter kit (0.5 gal) Liquid
832TC-40L - 40 liter kit (10 gal) Liquid
Thermal Specifications
Thermal Conductivity 0.682 W/m*K
Thermal Diffusivity 0.38 mm2/s
Volumetric Specific Heat 1.9MJ/m3*K

Silver Conductive Epoxy 8331

Forms high strength conductive bonds

This two part silver epoxy offers high electrical conductivity and strong conductive bonding. Use in place of traditional soldering on heat sensitive components. Good for repairing defective traces and creating jumpers on boards. Can be used as an effective heat sink adhesive. The Conductive Silver Epoxy comes in two 7g syringes.

Available Sizes
8331-14G - 14g (0.35 oz) Two 7g Syringes
Specifications
Cure time @ 24°C (75°F) 4 hours
Cure time @ 65°C
(150°F) 10 minutes
Working time @ 22°C 10 minutes
Volume resistivity 2.00 x 10-2 ohm · cm

Fast Set Epoxy 8332

Conveniently packed in a 25ml dual syringe, with a snap open cap, snap out paddle and mixing cup. Provides 1500 PSI bonding strength to paper, wood, metal, and ceramics.
Working time: 5 minutes - Full Cure: 1 hour

Available Sizes
8332-25ML - 25ml (1 oz) Dual Syringe

Specifications
Uncured Properties
Color Clear - Mix Ratio by Volume 1:1 - Mixed Viscosity 8,000-10,000 cps - Working time (28 grams @ 75°F) 4 min - Functional Cure @ 75°F 45 min - Coverage (based on 25 ml) 152 sq. in. @ .010" - Specific Volume 23.7 in3/lb - % Solids by Volume 100
Performance Characteristics
(7 days cured @ 75°F)
Shear Strength, ASTM D1002 1,400 psi
Operating temperature, dry 40°F to 200°F
4°C to 93°C
Cured density ASTM D792 1.10 gm/cm3
Cured hardness, ASTM D2240, Shore D 85
Dielectric strength 490 volts/mil