 |
4050
Safety Wash
Conductive, flammable, safe on plastics, moderate dry
time, low toxicity, low cost
A special blend of ethyl alcohol, isopropanol and ethyl
acetate. Strong enough to clean, grease, oil, smoke, ink,
organic and inorganic soils. An excellent choice when
a cleaner slightly more aggressive than IPA is needed.
Available Sizes
4050-400G
- 400g (14
oz) Aerosol
4050-500ML
- 500ml (16 oz) Trigger Pump
4050-525G
- 525g (18.5 oz) Aerosol
4050-1L
- 1L (33 oz) Liquid
4050-4L
- 4L (1 gal) Liquid
4050-20L
- 20L (5 gal) Liquid |
 |
406B
Superwash
Non-conductive, extremely flammable, safe on plastics,
fast dry time, low toxicity, low cost
Cleans and degreases printed circuit boards, machinery,
electrical and electronic devices.
Safe on plastics, Non-conductive, Zero residue, Fast evaporation,
100% Ozone safe, Safe for workers,
Dissolves light oils and residue
Variable valve allows user to control rate of flow
Extra effective with use of M.G. Chemicals' cat# 852 and
853 hog hair brushes.
Flammable - do not use on live circuits
Available
Sizes
406B-450G
- 450g (16 oz) Aerosol |
 |
411
HFE Plastic Safe
Non-conductive, non-flammable, safe on plastics, fast
dry time, very low toxicity, high cost
Cleans energized circuits, contacts, motors, and other
electronic equipment. A TF Solvent replacement. Approved
by SNAP without restrictions. Excellent for use with vapor
degreasers and ultrasonic tanks. Extra effective with
the use of M.G. Chemicals' cat#'s 852 and 853 hog hair
cleaning brushes.
100% Ozone safe, Fast drying, Non-flammable, Non-conductive,
Safe on plastics, Zero residue, Low toxicity, Non VOC.
Variable valve allows greater user control
Available in aerosol and liquid forms.
Available
Sizes
411-300G
- 300g (10.5 oz) Aerosol
411-1L
- 1L (35 oz) Liquid
411-4L - 4L (1 gal)
Liquid |
 |
4112
NPB Heavy Duty
Conductive, non-flammable, safe on most plastics, fast
dry time, med toxicity, moderate cost
Contains stabilized pure n-propyl bromide. An aggressive
cleaner excellent for removing a broad range of soils.
Safe on most plastics except for polycarbonate and polystyrene.
Fast dry, Non flammable, Leaves no residue.
Available
Sizes
4112-340G
- 340g (12 oz) Aerosol
4112-1L
- 1L (35 oz) Liquid
4112-4L
- 4L (1 gal) Liquid
4112-20L
- 20L (5 gal) Liquid
4112-200L
- 200L (50 gal) Liquid
Technical
and Physical Properties Data Boiling Point
69°C / 156°F
Melting Point less than -100°C / 166°F
Evaporation Rate 4.5 (ASTM-D-3539-76)
Specific Gravity 1.332
Viscosity / 25°C (cp) 0.49
Vapor Pressure / 20°C (torr.) 110
Vapor Density (Air = 1) 4.3
Specific Heat / 25°C 0.27
Latent Heat of Vaporization 58.8 cal/g
Water Solubility Negligible 0.25 g / 100ml
Surface Tension / 20°C 25.9 dynes/cm
Dielectric Constant / 20°C 7.98
Dielectric Strength 18,000 Volts
Flash Point none
Flammable Limits vol. 4.6% - 8.5%
Decomposition greater than 400°C
Appearance Clear, colorless to pale straw liquid
Color (ALPHA) 50 max
Water % less than 200 ppm
Acidity 0.002 wt. % (as HCL)
Acid Acceptance 0.19 wt. % NaOH
Free Halogen Almost Zero
Global Warming Potential (GWP) Almost Zero
Ozone Depletion Potential Almost Zero
Atmospheric Lifetime Potential about 6-10 days
Kauri Butanol Number 129
Hydogen Bonding 4.2
Hilebrand Parameter 17.9
Hansen Parameter Non-Polar 16.0
Hansen Parameter Polar 5.8
Corrosion of Metals Does not corrode carbon steel, copper,
stainless steel, aluminum, magnesium, titanium |
 |
4120 HFE Super
Cleaner Degreaser
Non-conductive, non-flammable, excellent cleaning strength,
fast dry time, zero residue, environmentally friendly
We have reformulated our existing HFE blends with a
newly developed solvent that allows us to maintain the
cleaning power, non-flammability, non-conductivity,
and environmental friendliness while dramatically reducing
the cost.
For removing flux, greases, oils, oxides, silicones,
carbon, dirt, smoke film and grime, where a non-flammable,
non-conductive solvent is required. Suitable for use
on live circuits. Test for plastic compatibility before
use. Extra effective with the use of M.G. Cat.#'s 852
& 853 Hog Hair cleaning brushes.
Replacing 141b was never so easy!
Non flammable, Non conductive, Non corrosive, Excellent
Cleaning, Strength, Fast dry, Leaves no residue, Environmentally
Friendly, 100% Ozone safe, Significantly lowers cost
than standard HFE Blends
Perfect replacement for 141B
Available Sizes
4120-450G - 450g (16 ozAerosol)
|
 |
821
Ultrasonic Cleaner
Conductive, non-flammable, safe on most plastics, slow
dry time, low toxicity, low cost
Super-Concentrated Formula
For use in all ultrasonic tanks and equipment for removing
flux, oils, and most types of soils.
Super concentrated- dilute one part cleaner to 100 parts
water
Available Sizes
821-250ML - 250ml (8 oz)
Liquid
821-1L - 1L (35
oz) Liquid |
 |
824
Isopropyl Alcohol
Conductive, flammable, safe on plastics, moderate dry
time, low toxicity, low cost, 99.953% Pure Anhydrous
General all-purpose cleaner. Safe on plastics. Extra effective
with MG Chemicals' Hog hair cleaning brushes.
For use on:
PC Boards, Connectors & contacts, Fibre optics, Semi-conductors,
Printed circuit boards, Tape heads, Light oils, Office
& medical, equipment, Relays, Flux
Available
Sizes
824-W
- 5" x 8" Pre-saturated wipes
824-100ML
- 100ml (3.5 oz) Liquid
824-350ML
- 350ml (12 oz) Pump
824-1L
- 1L (35 oz) Liquid
824-4L
- 4L (1 gal) Liquid
824-1G
4L - (1 gal) Liquid - 4 per carton
824-20L
- 20L (5 gal) Liquid
824-205L
- 205L (55 gal) Liquid |
 |
8260
Immersion Super Solvent
Conductive, combustable, safe on most plastics, very slow
dry time, non-toxic, moderate cost.
A super strong, low odour, slow evaporating solvent that
is highly effective in degreasing applications.
Excellent for wipe cleaning, ultrasonic cleaning and parts
bath cleaning.
Non-toxic, Biodegradable, Leaves no residue, Non-ozone
depleting, Non-global warming, EPA and SNAP approved,
High flash point 139°F)
Directions
Test on plastics before using. Substrates can be
cleaned by either immersion or spraying. Heating is not
necessary. Ultrasonics can increase the cleaning performance.
Physical Properties
Kauri Butanol Value > 1000
Boiling Point 154°C / 309°F
Viscosity 2.8 cP @ 20°C / 77°F
Specific Gravity 1.03
Flash Point 59°C / 139°F
Available
Sizes
8260-1L
- 1L (33 oz) Liquid
8260-4L
- 4L (1 gal) Liquid
8260-20L
- 20L (5.5 gal) Liquid |
 |
827B
Heavy Duty
Conductive, extremely flammable, attacks plastics, fast
dry time, med toxicity, low cost
New
and improved formula
Cleans and degreases contacts, connectors, motors,
printed circuit boards, relays, industrial machinery and
switches.
Dissolves wax, tars, and adhesives.
Removes oils and lubricants.
Fast evaporating
Aggressive Cold Cleaner
Extra effective with M.G. Chemical's Hog Hair Cleaning
Brushes.
Flammable - do not use on live circuits
Test on plastics before using.
Available
Sizes
827B-425G
- 425g (15 oz) Aerosol
827B-1L
- 1L (35 oz) Liquid
827B-4L
- 4L (1 gal) Liquid
827B-20L
- 20L (5 gal) Liquid |
|