 |
Silver Conductive
Epoxy # 8331- 14g
Forms high strength conductive bonds
This two part silver epoxy offers high electrical conductivity
and strong conductive bonding. Use in place of traditional
soldering on heat sensitive components. Good for repairing
defective traces and creating jumpers on boards. Can
be used as an effective heat sink adhesive. The Conductive
Silver Epoxy comes in two 7g syringes.
Specifications
Cure time @ 24°C (75°F) 4 hours
Cure time @ 65°C (150°F) 10 minutes
Working time @ 22°C 10 minutes
Volume resistivity 2.00 x 10-2 ohm · cm |
 |
Fast Set
Epoxy #8332-25ml
Conveniently packed in a 25ml
dual syringe, with a snap open cap, snap out paddle and
mixing cup. Provides 1500 PSI bonding strength to paper,
wood, metal, and ceramics.
Working time: 5 minutes
Full Cure: 1 hour
Specifications
Uncured Properties
Color Clear
Mix Ratio by Volume 1:1
Mixed Viscosity 8,000-10,000 cps
Working time (28 grams @ 75°F) 4 min
Functional Cure @ 75°F 45 min
Coverage (based on 25 ml) 152 sq. in. @ .010"
Specific Volume 23.7 in3/lb
% Solids by Volume 100
Performance Characteristics
(7 days cured @ 75°F)
Shear Strength, ASTM D1002 1,400 psi
Operating temperature, dry 40°F to 200°F 4°C
to 93°C
Cured density ASTM D792 1.10 gm/cm3
Cured hardness, ASTM D2240, Shore D 85
Dielectric strength 490 volts/mil |
| |
Super Cyanoacrylate
Adhesive # 8333
Super Cyanoacrylate Adhesive has been formulated to quickly
bond rubber, plastics, metal, and ceramics. It offers
excellent strength characteristics.
Available
Sizes
8333-20G -
20g (1 oz) Liquid
8333-3G - 3g (0.1 oz) Liquid
Liquid State
Base Chemical Ethyl cyanoacrylate
Color Clear transparent liquid
Flashpoint 185°F (85°C)
Viscosity 30-70 cps
Typical Gap 0.004 inches
Vapor Pressure, mm HG @ 70°C 10
Specific Gravity, @ 25°F / -4°C 1.06
Refractive Index, n20C/D +/-0.03 1.45
Cured State
Melting Point 365°F (185°C)
Softening Point 306°F (153°C)
Heat Distortion 250°F (121°C)
Glass Transitio 42°F (172°C)
Volume Shrinkage 13%
Rockwell Hardness 74 M
Cured Temperature Range -65°F to 180°F (-54°C
to 82°C)
Outgassing, 10-6 mmHG, 72°F 0
Elongation <2%
Dielectric Constant 3.98
Volume Reactivity 8.6 x 10-10 ohm-cm
Strength
Data
Impact, ft-lbs, ASTM-950 7-10
Tensile, steel, psi, ASTM-D2095 4700
Tensile, shear, psi, ASTM-D1002 Steel 2800
Aluminum 1600
ABS665* ,Nylon850* ,Rigid PVC700* ,SBR85* ,EPDM100 |
| |
Super Cyanoacrylate
Adhesive # 8334
Super Cyanoacrylate Adhesive has been formulated to quickly
bond rubber, plastics, metal, and ceramics. It offers
excellent strength characteristics.
Available
Sizes
8334-3G -
3g (0.1 oz) Gel
Liquid
State
Base Chemical Ethyl hybrid cyanoacrylate
Color Clear transparent gel
Flashpoint 185°F (85°C)
Viscosity 45 - 85,000 cps
Vapor Pressure, mm HG @ 70°C 8
Specific Gravity, @ 25°C 1.08
Soluble
in
Acetone, MEK, Nitromethane
Cured
State
Setting Time
Steel 240-280 sec. , Aluminum 260-300 sec.
Rigid PVC 240-280 sec.
Melting Point 368°F (187°C)
Softening Point 303°F (151°C)
Cured Temperature Range -65°F to 180°F (-54°C
to 82°C)
Typical Gap 0.020 inches
Elongation >2%
Soluble in
Pacer X-8 Debonder, Acetone, Nitromethane
Strength
Data
Tensile strength, steel 4000 psi
Shear Strength (ASTM-D-1002)
Steel 2800 psi
Aluminum 1600 psi
ABS SF* Nylon SF* Rigid PVC SF* Soft PVC SF* PMMA SF*
Balsa SF* |
| |
Super Glue
Display Pack # 8335
The Super Glue Display Pack offers a point of sale solution
for MG Chemicals Super Glue products. Contains 12 units
of Cat. No. 8333 Super Glue Liquid and 12 units of Cat.
No. 8334 Super Glue Gel.
Convenient for both customer and sales person
Quick sale at cash register
|
|
