| |
LAN TESTER FOR RJ45, RJ12, RJ11, RJ10 & BNC
This LAN tester for different cable types is indispensable
in network installation and maintenance. This compact
device can be used for testing network and telephone
cables (RJ-45, RJ-11 and BNC). It can test most types
of telephone and computer cables.
Features
LED indication
Advanced design for easy testing
BNC adapter for testing BNC cables
Ability to test cables from a distance and in places
that are not easily accessible
Automatically runs all tests and checks for continuity,
open, shorted and crossed wire pairs
Specifications
Tests : RJ-45, 10 Base-T, Token Ring, RJ11/12
USOC & coaxial BNC cables
Power supply : 9V-battery (not incl.)
$45.60 Canadian
Dollars
|
| |
LAN TESTER FOR RJ45,
RJ12, RJ11
This LAN tester for different cable types is indispensable
in network installation and maintenance activities.
This compact device can be used for testing network
or telephone cables (RJ-45, RJ-11,12) and for most
types of computer cables.
Features
* LED indication
* advanced design for easy testing
* ability to test cables from a distance and in places
that are not easily accessible
* automatically runs all tests and checks for continuity,
open, shorted and crossed wire pairs
* slow and fast test switch
Specifications
* tests: RJ-45, 10 Base-T, Token Ring, RJ11/12 cables
* power supply: 9V-battery (not incl.)
$16.80 Canadian
Dollars
|
| |
This Multi-Network Cable Tester is specified to quickly test by auto scanning the wires continuity, miss wiring and polarization in your network cables (T568A / T568B / 10Base-T / Token Ring).
$ 68.60 Canadian Dollars
|
 |
Cable Tracker with Tone Generator
Features:
Network tester: consists of a tone generator and a probe
- method: use the tone generator and the probe to determine where a cable is going and whether or not (and where) the cable is interrupted
- signal viewing in 3 modes: lamp (L), speaker (SP) or both (S&L)
- tone generator output (square waveform): single (900Hz) or dual (900 - 1000Hz)
- comes with: soft carrying bag
Specifications:
tone generator:
- working voltage: DC 9V ±15% (battery not incl.)
- working current: 10mA (intermittent tone) / 20mA (continuous tone)
- output wave form: square wave signals ±10Vpp
- single audio frequency: ± 900Hz
- dual audio frequency: ± 900Hz - 1000H
- Probe:
- working voltage: DC 9V ±15% (battery not incl.)
- working current: 25mA (L) / 80mA (max. SP volume) / 100mA (max S&L volume)
- max. reception sensitivity: > 30mV
$ 56.60 Canadian
Dollars
|
|
