A great introduction to the world of electronics! Start a great hobby in electronics. Spring coil connections make it safe and easy for anyone to use. Includes detailed; step-by-step illustrated manual for easy construction. Comes with built-in speaker; 7-segment LED display; two
$ 67.00 Canadian
Show your love in an original way that your heart
still beats faster for him or her. 28 LEDs form 2 blinking
Consumption : ± 8mA - power supply : 9V battery
(not incl.) - dimensions : 2.4" x 2.4" x 1.2"
$ 14.55 Canadian
For different applications (such as model construction),
and recreational. Adjustable flashing speed with two
consumption : ± 8mA - power supply : 9V battery
(not incl.) - dimensions : 1.2" x 1.4" x 0.6"
$ 6.99 Canadian
Four high-intensity LEDs light up and react simultaneously
on every sound. For different funny and practical applications,
such as : sound indicator, simple sound-to-light unit
for music, for the hearing impaired : can be used to
indicate the telephone, door bell. Adjustable sensitivity
with potentiometer. Built-in microphone.
consumption : 0.5mA min. / 12mA max.- power supply :
9V battery (not incl.)
dimensions : 1.6" x 2.2" x 1.4"
Signal output : sine wave, triangle, square wave and integrator
(selectable through jumper). Signal frequency : about
1KHz (fixed). Output level : adjustable from 0 to 100mVrms
power supply : 9V battery (not incl.) - dimensions : 2.2"
8 LEDs. Different LED running effects are selectable
(PROG push button). Adjustable effect speed (SPEED potentiometer).
Power stand-by push button (OFF push button).
power supply : 9V battery (not incl.) - dimensions :
3.5" x 1.6"
$ 18.80 Canadian
Gives alarm sound when water is detected. Incorporated
alarm buzzer. Water sensor can be placed at a distance
by cutting the board and using wires to connect the sensor.
power supply : 9V battery (not incl.) - dimensions : 1.8"
Electronic die with LED indication. Rolls slowly out when
the push button is released.
* power supply: 9V battery (not incl.) * dimensions: 1.7
With loudspeaker input. Modulates a lamp according to
the music signal at the input. Optical isolated loudspeaker
input. Adjustable sensitivity.
input sensitivity : 2W to 60W - maximum load : 120W at
120VAC and 230W at 230VAC - dimensions : 2.4" x 1.6"
For intermittent operation of circuits and equipment.
Blinking light, video/photo single frame shooting, slide
projector control, miniature models.
3A/24V output relay with dry switch-over contact - pulse
time adjustable : between 0.5 and 5 sec. - pause time
adjustable : between 2.5 and 60 sec.
power supply : 12Vdc / 100mA - dimensions : 1.6"
Just 4 LEDs and 4 push buttons provide hours of fun. The
aim-of-the-game is to repeat a pattern, which is generated
at random. The pattern is played both visually and audible
or visually only (selectable). It features 4 difficulty
levels, which can be selected at start-up. The replay
speed gradually increases during the game, to make it
even more challenging. Low power consumption. Microprocessor
controlled. Auto power off.
power supply : 3 x 1.5V AA batteries (not incl.) - dimensions
: 2.0" x 2.6"
18.35 Canadian Dollars
Generates 4 different sounds : police siren, fire brigade, emergency vehicle and laser gun. RV1 adjusts sound pitch. On/off switch and PCB speaker included.
- power supply: 9V battery (not incl.)
- dimensions: 2.4 x 1.6"
25.35 Canadian Dollars
Operates at safe voltage level. Makes lamps flash to the rhythm of the music. Usable for halogen bulbs. Optically isolated speaker input. Adjustable sensitivity. Can be used in the car, if the lamps are isolated from the chassis.
- input sensitivity: 2W to 60W
- maximum load: 50W / 12V or 100W / 24V
- power supply: 12V to 24V DC or AC
- dimensions: 1.8 x 3.5"
$ 24.55 Canadian Dollars
Surprise your friends in the disco. 5 red LEDs. Incorporated
microphone. Adjustable sensitivity.
power supply : 3V type CR2032 battery (not incl.)
$ 14.20 Canadian Dollars
37 LEDs. Spinning sound. 'Winner'-tune for each color. Spins LEDs between games. Pushbutton operation. Microprocessor technology.
24.50 Canadian Dollars
- auto power-off
- low power consumption
- power supply: 3 AA battery operation (not incl.)
- dimensions: Ø3.6 x 1.3"
Applications : announce visitors, warn against burglars,
set boundaries, for science projects,...
audible (85dB) and visible (LED) alert - range : 3.3ft
to 13ft - on/off switch provided
power supply : - 9V battery holder and adapter jack included
transmitter : 9VDC / 50mA max. - receiver : 9VDC / 20mA
dimensions : - transmitter : 2.2" x 1.6" - receiver
: 3.9" x 2.0"
not recommended for outdoor use
19.50 Canadian Dollars
Switch-on at dusk, turn off at dawn, fully automatic.
wide-range adjustable sensitivity - delay circuit avoids
NO/NC 24V/5A max. relay output - power supply : 12VDC
with adapter-connector - dimensions : 2.6" x 2.0"
$ 15.60 Canadian
LED with 'realistic-appearing' flash sequence
simulates active car alarm system
activates automatically when the engine is turned off
easy to install, just two wires to connect
low current consumption : 12mA max. (12V only) - comes
complete with pre-wired LED-holder and two warning labels
- dimensions : 2.3" x 1.8"
$ 14.55 Canadian
Attractive bright colored bug-shaped miniature
robot. The microbug is always hungry for light, it drives
towards it !
two open chassis sub-miniature motors - adjustable light-sensitivity
suits almost any light condition and allows to control
it's 'bug-like' behavior - LED 'eyes' indicate driving
direction - stops in total darkness
power supply : 2 x 1.5V AAA batteries (not incl.) -
dimensions : 4.0" x 2.4"
$ 19.50 Canadian
Attractive bright colored bug-shaped miniature robot -
the microbug is always hungry for light, it drives towards
it - two open chassis sub-miniature motors
adjustable light-sensitivity suits almost any light condition
and allows to control it's 'bug-like' behavior - adjustable
speed - choose between two different walks
LED 'eyes' indicate driving direction - stops in total
2 x 1.5V AAA battery operation (not incl.) - dimensions
: 4.3" x 3.5"
24.95 Canadian Dollars
Miniature traffic light as used on four-way junctions. Realistic operation with adjustable delay. 12 LEDs. Great for model railroads, exhibitions, as a toy, ...
- low power consumption: 15mA
- power supply: 9V battery (not incl.)
- ON/OFF switch
- dimensions: 2 x 1.4 x 4.5"
$ 18.15 Canadian
General purpose low-cost thermostat with NTC temperature
sensor. Output relay with LED-indicator.
temperature range: 41°F to 86°F approx. - relay
power rating: 24V DC/AC 3A
power supply: 12V DC / 100mA - dimensions: 2.1 x 2.4
$ 13.55 Canadian
10-LED wheel of fortune - push the button to start spinning
spinning speed gradually decreases - finally it stops
and one LED remains lit
auto power-off - low power consumption
power supply: 9V battery (not included) - dimensions:
Ø2.6 x 1.3"
$ 14.55 Canadian
make your voice sound like a robot
add vibrato effect
use the 'pitch'-buttons and make your voice sound lower or higher
built-in microphone and power amplifier with volume control, just add a speaker
hours of fun!
for parties, plays, recordings, games, etc.
speaker / line outputon/off switch
max. output - power: 1.5 W (4 ohm)
$ 19.50 Canadian
- 1 LED scans from side to side or in 1 direction (selectable)
- as attention grabber in stores, at exibitions, etc...
- as seen in classic TV series...
- toys, , scale and RC models, as gadget, for stage, plays, movies, etc...
- 6 high-intensity 3mm red leds
- power supply: 4-15VDC (20mA at 12VDC)
- fixed scan speed (side to side): 0.5s
- dimensions: 2.18 x 0.99 x 0.39"
$ 12.90 Canadian
Easy two-step install
- makes your 3rd brake light flash
- selectable number of flashes: 5 or 10 times
- selectable flash repeat interval: always or not within 5-7sec between two brakes
- includes shrink tube to cover complete unit
- flash frequency: 7 times per second
- power supply: 12VDC
- max load: 4A
- dimensions: +/- 2.4 x 1.2 x 0.78"
$ 22.75 Canadian
3D XMAS TREE
The ultimate Xmas gadget.
16 flashing red LEDs
$ 17.20 Canadian Dollars
extra green and yellow LEDs provided to customize your
can be hung and supplied trough the wires
low power consumption : 8mA
9V battery operation (not incl.)
will operate on 12VDC (e.g. in cars, ...)
dimensions : 3.1" x 3.5" x 4.0"
Mini FM modulator (100-108MHz). Integrated pre-amplifier,
to which any type of microphone may be connected. Family
broadcasts, baby phone, security. May be received by any
portable FM radio or tuner.
power supply : 9 - 12VDC
input sensitivity preamplifier : 5mV
PCB dimensions : 1.8" x 2.8"
recommended housing : G410
$ 23.95 Canadian
1A POWER SUPPLY KIT
This small power supply provides a regulated voltage,
adjustable between 1.5 and 35 volts at 1 Amp. With the
LM317 regulator remarkably better ripple and regulation
characteristics are given than with conventional regulators.
Current limiter and thermal overload protection are included
in the IC. Supplied without heatsink.
output current : 1.5A max.
$ 21.50 Canadian Dollars
max. dissipation : 15W (cooled)
max. input voltage : 40VDC
PCB dimensions : 2.1" x 2.1"
recommended housing : -
recommended transformer : -
UNIVERSAL STEREO PRE-AMPLIFIER
Universal low-noise stereo pre-amplifier.
frequency range : 40Hz - 30kHz (-3dB)
$ 23.95 Canadian Dollars
max. input voltage : 50mVrms
adjustable gain : 40dB max.
output impedance : 1Kohm
power supply : 10-30VDC / 5mA
PCB dimensions : 1.7" x 2.6"
UNIVERSAL START/STOP TIMER
Miniature timer for all applications requiring a delay
of up to 60 minutes. The control range may be adjusted.
power supply : 15VDC / 55mA
$ 19.50 Canadian Dollars
relay : 3A / 220V switchable
time interval (without modifications) : adjustable from
0 to 15 minutes
PCB dimensions : 1.5" x 2.7"
Flashing light effects for discos. Make your own snapshots
and "lightning" light effects. Flash frequency
adjustable from 2 to 20Hz.
power supply : 110V - 120V AC
$ 29.50 Canadian Dollars
PCB dimensions : 3.4" x 2.6"
The alarm detects sudden voltage drops of the battery
when the interior, trunk, or hood lights are switched
on. To ensure correct operation, a number of control indications
have been included, such as : flashing LED to indicate
that the alarm is in standby mode after a set time (after
you have left the car). Pre-alarm (built-in buzzer) to
indicate that the alarm is activated, so that you will
not forget to switch it off. The alarm is easy to switch
on and off, either automatically or by means of the ignition
switch or a remote control unit, such as the K6706B or
K6706G/K6707 or K6708/K6709.
detects voltage drops of the battery
$ 31.25 Canadian Dollars
entry delay time : 2 to 30 seconds with buzzer indication
exit delay time : 2 to 180 seconds with LED indication
alarm period : 60 seconds with automatic reset
power supply : 12V
standby current : 25mA
relay output : 5A
PCB dimensions : 2.4" x 3.9"
recommended housing : -
2-CHANNEL RF CODELOCK TRANSMITTER GRAY COLOR
This transmitter is suited to control the RF codelock
receivers K6707 (one channel) and K6727 (two channels).
A choice can be made from over 8000 codes.
color : gray
LED on / off and battery indication
power supply : 12V battery type V23GA, GP23GAC
$ 30.50 Canadian
This signal tracer /injector has been designed to inject
or detect a specific signal into an audio circuit in need
of repair (such as amplifiers, radios, tone controls,
…) so as to detect the fault. In this way problems can
be traced more easily. The signal tracer may also be used
as a simple monitor or amplifier.
$ 34.75 Canadian Dollars
0-2.5Vrms output (adjustable)
output impedance : 1.5Kohm
frequency : ± 1KHz
3.5mV to 10Vrms sensitivity (adjustable)
gain : 40dB
input impedance : 50Kohm
output power : 0.5W / 8ohm
power supply : 7-9VAC or 9-12VDC / 150mA
dimensions : 2.4" x 2.1"
MAINS VOLTAGE DETECTOR
With this device wires can be very easily checked for
mains voltage. It can be used to search for wires installed
in or behind walls or to trace interruptions in wiring.
A flashing LED indicates whether or not voltage is present.
The flashing speed indicates how close by the wire is.
If an audible signal is also desired, space has been provided
on the PCB for buzzer SV4/12-S to be connected. The PCB
has been specially constructed to fit entirely into the
separately available box type G407.
detection of mains conducting cables
$ 21.00 Canadian Dollars
LED indication (buzzer optional)
adjustable detection distance : max. 3.9"
supply voltage : 9V battery
dimensions : 2.2" x 2.5"
LOW COST UNIVERSAL BATTERY CHARGER
Charges NiCd or NiMH batteries. Ideal for car use. Transforms
a mains adapter in to a charger (adapter socket included).
Charge cellular phone, toys, portables, video batteries,
... Selectable charge current. LED charge indication.
charge current : 50mA, 100mA, 200mA, 300mA, 400mA (selectable)
$ 17.95 Canadian Dollars
supply voltage : from 6.5V to 21V (depending on used
supply current : same as charge current
power supply polarity protected
LED function indication
dimensions : 1.6" x 2.4"
PINK NOISE GENERATOR
To analyze the acoustic properties of a room (usually a living room), a good pink noise generator together with a spectrum analyzer is indispensable. Moreover, a microphone with as linear a frequency characteristic as possible (from 20Hz to 20kHz) is needed. If you have an equalizer available, then the response can not only be checked but also corrected. Easily adapted to produce "white noise"
- pseudo random digital noise
- regulator sliding length: 33 bit
- clock frequency: adjustable between 30 and 100kHz
- pink noise filter: 3dB / octave (20Hz to 20kHz)
- output voltage: 150mVrms
- output impedance: 1Kohm
- power supply: 9 - 12V AC or 12 - 15V DC / 5mA
- PCB dimensions: 2.8 x 1.7"
$ 24.95 Canadian dollars
PIC PROGRAMMER & EXPERIMENT
Suitable for programming Microchip® FLASH PIC(tm)
Supports 4 different 300 mil. PICs : 8p, 14p, 18p and
test buttons and LED indicators to carry out educational
experiments, such as the enclosed programming examples
easy connection to a PC through the serial port
Enclosed is a Flash Microcontroller (PIC16F627) that can
be reprogrammed up to 1000 times for experimenting at
Software to compile and program your source code is included.
Minimum system requirements :
IBM Compatible PC, Pentium or better
CDROM Drive - free serial RS232 port
these FLASH microcontrollers :
PIC12F629, PIC12F675, PIC16F83, PIC16F84(A), PIC16F871,
PIC16F872, PIC16F873, PIC16F874, PIC16F876, PIC16F627(A),
PIC16F628(A), PICF630, ...
Power supply : 12 or 15V DC, min. 300mA, non-regulated
adapter (PS1208USA (115Vac))
Dimensions : 5.75" x 4"
55.10 Canadian Dollars