|
BPS
BusBoard Proto Systems
BPS prototyping boards have unique board patterns
that accelerate the construction of your electronic
prototypes, circuits, and assemblies and simplify
wiring.
BPS offers high quality FR4 epoxy prototyping boards
at great prices.
|
|
#
BB3UC
BusBoard-3U-CONN has the BusBoard zig-zag circuit pattern
and features footprints for many commonly used connectors.
Connector footprints are provided for DB-9, DB-25, BNC
(2), 1/8" sub-mini (2), telephone (2), telephone
handset (2), and coaxial power.
Some footprints overlap and can't be used at the same
time. Please refer to the datasheet.
Note: BB3UC does not have the RJ45 10baseT ethernet
connector footprint like PR3UC does. |
|
#
PR3UC
ProtoBoard-3U-CONN has a general purpose 6 holes per
strip circuit pattern and features footprints for many
commonly used connectors.
Connector footprints are provided for DB-9, DB-25, BNC
(2), 1/8" sub-mini (2), telephone (2), telephone
handset (2), RJ-45, and coaxial power. Some footprints
overlap and can't be used at the same time. Refer to
the datasheet.
Note: BB3UC does not have the RJ45 10baseT ethernet
footprint as this board does.
The glass epoxy board is a standard single height (3U)
VME/Eurocard size (100 x 160mm). |
 |
 |
 |
# BB3U
BusBoard-3U has a zig-zag circuit pattern that allows
opposite sides of an IC or connector to be on the same
or different traces. ICs and headers can be connected
pin-to-pin without any extra wires or jumpers.
The FR4 glass epoxy board is a standard single height
(3U) VME/Eurocard size (100 x 160mm). |
# POW3U
PowerBoard-3U has interleaved power and
ground rails to easily distribute power to your circuits.
The general purpose strip board circuit pattern with 6
holes per strip is good for general purpose analog and
digital use.
The FR4 glass epoxy board is a standard single height
(3U) VME/Eurocard size (100 x 160mm).
|
# PR3U
ProtoBoard-3U is a general
purpose prototyping board with pads connected in rows.
The copper tracks are pre-cut into 0.6" lengths.
Holes are drilled on 0.1" centers with a 0.037"
drill for ICs or square post headers.
The FR4 glass epoxy board is a standard
single height (3U) VME/Eurocard size (100 x 160mm). |
 |
Part
Number |
Canadian
Dollars |
| BB3U |
12.80 |
| BB3UC |
12.80 |
| PAD3U |
12.80 |
| POW3U |
12.80 |
| PR3U |
12.80 |
| PR3UC |
12.80 |
| SMT3U |
12.80 |
|
 |
# SMT3U
SMTboard-3U has rectangular pads ideal for 0805 and 1206
surface mount components along with three SOIC and SOT23
prototype areas. Unplated holes in every second pad allows
for easy connection to the solid ground plane on the back.
There is a through-hole prototyping area at one end. The
glass epoxy board is a standard single height (3U) VME/Eurocard
size (100 x 160mm). |
|
# PAD3U
PadBoard-3U has a general purpose pad-per-hole pattern.
It is a double sided board with plated holes which allows
soldering to either side of the board. A square pad every
5th hole makes it easy to align components.
The FR4 glass epoxy board is a standard single height
(3U) VME/Eurocard size (100 x 160mm).
|
|
